Back to Top

Welcome to our new site. Please let us know of any issues.

Handcrafted Ceramic Lighting Fixtures

RE105-BG-MSW Asia Wall Sconce Black Gloss and Multi Seaweed

Click on above image to view full picture

  • RE105-BG-MSW Asia Wall Sconce Black Gloss and Multi Seaweed
  • RE105-BG-MSW Asia Wall Sconce Black Gloss and Multi Seaweed

Asia Wall Sconce Black Gloss and Multi Seaweed

Base SKU(s): RE105-BG-MSW

Availability: In stock

  • Buy 50 for $165.00 each and save 64%

* Required Fields

Available Size:
  • 14"W x 7"H x 3.75"D
  • Made from reclaimed window glass and ceramic
  • Resistant to rust and corrosion. Suitable for damp or wet locations (indoor and outdoor).
  • Handcrafted with pride in the USA

This one-of-a-kind wall light integrates Multi Seaweed  fused art glass made from reclaimed window glass and Black Gloss kiln-fired glazed ceramic. Light shines through the open top and bottom of this crescent-shaped sconce and illuminates the colored and raised bamboo design on the center pane of glass. Subtle color and texture variations are the hallmark of a truly handcrafted piece of art.


Please view related products for additional color combinations. Contact us directly for any custom requests. 

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.

To Install

1. Turn off power at the main breaker box prior to starting installation.

2. Using two box machine screws (G) and fasten the crossbar (H) to the electric box.

3. Thread the nipple (E) into the crossbar.

4. Using suitable wire connectors (not provided) connect the fixture wires to supply wires—white to white (K) and black to black (I). Connect ground wires (J) to crossbar ground screw (F). Caution: Make sure wire connectors are secure, and no bare wire is exposed.

5. Place the ceramic fixture (B) over the box so that the threaded nipple protrudes through the mounting hole in the fixture.

6. Place the rubber washer (D) then brass washer (C) over the nipple and fasten securely with knurled nut (A). Do not over tighten or ceramic may crack.

7. Install light bulb(s).

8. Restore electricity at main breaker.


Write Your Own Review

You're reviewing: Asia Wall Sconce Black Gloss and Multi Seaweed