Melos Corner Sconce


Cylinder Perforated Up Down Corner Wall Light


Our Melos Corner Sconce is a perforated cylinder-shaped flush wall light. We created this fixture with an open top and bottom. As a result, it has an up and down light pattern. This modern corner wall sconce is used in guest bathrooms, grand entryways, and living rooms. It can also be used to highlight architectural features. As a designers you’ll enjoy choosing a custom color and finish to match your overall design. Another great design tip is to mix-and-match with other styles from our Islands of Light Collection. You can also use energy efficient LED and smart light bulbs in our fixtures. All of our ceramic lighting is handmade in the USA by our local artisans. But most importantly our products are meticulously built to last indefinitely.



  • Provides up & down wall light while eliminating harsh glare
  • Resistant to corrosion and well suited for indoor or covered outdoor use
  • Recessed back to conceal wiring & mount flush over a junction box
  • LED Smart Bulb Compatible
  • Must be mounted in a 90 degree corner and can be mounted on either side.

All of our light fixtures are made to U.S. and Canadian UL, ETL and CSA standards with UL listed electrical components.

N20301: Fossil SCONCE

DIMENSIONS: 5.25″W x 9.75″H x 6.75″D

  • Standard/Damp Location: Accepts (1) E26 Base Bulb (Not included)
  • Energy Star LED: (1) Energy Star E26 Base LED Bulb Included


All of our fixtures are suitable for both indoor and outdoor locations. Our fixtures are rated for standard use for indoor and damp locations. Such as, bathrooms, patios and covered garages. Our Standard/Damp Location wall sconces when used outdoors need to be under an eave or overhang.

To use our fixtures in direct rain you will need to select our Outdoor/WET Location lamping option. You can view all of our sconces that we make Outdoor/WET here.


You can see our California Prop 65 Page for the disclosure. You can also follow the link to the state’s full list of regulations.

California Residents: Prop 65 regulations


While our bisque ceramic finish is beautiful in its natural bare state, we can make it ANY color. Choose from one of our popular glazes, faux or solid acrylic finishes, or specify a color from a recognized quality paint brand (e.g. Sherwin Williams or Benjamin Moore). If you enjoy DIY, our bare bisque ceramic is smooth and easy to paint.


Our clay produces a beautiful matte off-white bisque finish when fired. You can use our natural bisque fixtures for a clean and simple look, you can paint the bare bisque yourself, or we can apply your choice of finish for you.


Allow us to make your fixtures match your decor perfectly. If one of our most popular finishes isn’t exactly what you’re looking for, you can

  • Specify a paint brand, color and sheen
  • Select one of our sumptuous kiln-fired glazes
  • Or, choose a signature A19 faux finish

All of our finishes are applied to order. Adding a finish makes your order custom. Custom fixtures are non-returnable. Subtle differences in color and texture from batch to batch are characteristics of our handmade products.

To order a Faux Finish, Glaze or Custom Color Match, please select CCM Custom Color when ordering and at check out please write which finish you would like in the notes section.

See All A19 Signature Finishes


All of our lighting fixtures come complete with installation hardware and are easy to mount to a standard round or octagonal junction box. Watch how to install A19’s artisan ceramic wall sconces.



This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture.

Parts Included:

This illustration represents a typical fixture and may not match every style.

A- Knurled Nut

B- Ceramic Fixture

C- Brass Washer

D- Rubber Washer

E- Nipple

F- Green Ground Screw

G- Box Machine Screws

H- Crossbar

I- Black Wire

J-Ground Wire

K- White Wire

To Install

  1. Turn off power at the main breaker box prior to starting installation.
  2. Using two box machine screws (G) and fasten the crossbar (H) to the electric box.
  3. Thread the nipple (E) into the crossbar.
  4. Using suitable wire connectors (not provided) connect the fixture wires to supply wires—white to white (K) and black to black (I). Connect ground wires (J) to crossbar ground screw (F).

Caution: Make sure wire connectors are secure, and no bare wire is exposed.

  1. Place the ceramic fixture (B) over the box so that the threaded nipple protrudes through the mounting hole in the fixture.
  2. Place the rubber washer (D) then brass washer (C) over the nipple and fasten securely with knurled nut (A). Do not over tighten or ceramic may crack.
  3. Install light bulb(s).
  4. Restore electricity at main breaker.

If you need further assistance, please contact us. We appreciated your business and hope you enjoy your handmade lighting fixture.

*A-19, Inc. will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

Download Mounting Instructions

Care & Maintenance


Natural “bisque” (unpainted ceramic) fixtures can be cleaned by sanding with fine 150-grit sandpaper. Do not use liquid cleaners on the porous bisque surface.


If you enjoy DIY, our bare bisque ceramic is smooth and easy to paint. You may use any basic acrylic or latex paint of your choosing. For the ease of clean-up, etc. water based paint is recommended. Should you choose oil based paint (e.g., a can of spray paint), we recommend using an appropriate primer first; otherwise, a primer is not necessary.


A19’s finishes are durable enough to hold up to wear both indoors and out. The exterior surface can be dusted or wiped clean with a non-abrasive damp cloth or sponge.


To prevent water from reaching the electrical connections, apply a bead of silicone around the full perimeter of the fixture housing to seal it to the wall surface. Our standard damp location fixtures are suitable for indoor or outdoor locations subject to condensation of moisture. Select our Outdoor/WET rated option when the light fixture or electrical components will be directly exposed to rain water.


A19 ceramic lighting fixtures are made under the highest standards of quality and workmanship. In addition to, A-19, Inc. warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home. If your light fixtures are purchased for industrial, commercial and business use you are warranted for a period of 5 years. See Full Warranty


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…